Manufacturer ASME B16.9 Titanium Alloy eccentric reducer Fittings
Reducing pipe (size head) is a piece of pipe used in reducing pipe
diameter. The forming process is usually used for reducing the
diameter pressing, expanding pressing or reducing the diameter and
expanding pressing, for some specifications of reducing pipe can
also use stamping forming.
Advantages Of Titanium Products
1. Corrosion resistance: Titanium pipe works in wet air and
seawater media, and its corrosion resistance is significantly
higher than that of stainless steel. It has strong pitting, acid
and stress corrosion capabilities.
2. The low temperature resistance of titanium alloy is good:
titanium alloy can still maintain its mechanical properties at low
temperature.
3. high strength: The density of titanium alloy is generally 4.51g
/ cm3, which is 60% of steel. The specific strength (strength /
density) of titanium alloy is much higher than other metal
structural materials.
4. High thermal strength: Titanium pipes can be maintained at 450 °
C for a long time, and the strength is high, but the specific
strength of aluminum alloy decreases at 150 ° C. The operating
temperature of titanium alloy is lower than 500 ° C, and the
operating temperature of aluminum alloy is lower than 200 ° C.
5. Fifth, the surface is smooth, no scaling layer, the scaling
coefficient is greatly reduced, the strength of titanium pipe
fittings is higher than that of high-quality steel, and it has good
heat resistance, low temperature toughness and fracture toughness.
Titanium products are mainly used for aircraft rockets, missile
structures and titanium fixing. device.
Standard Detials (Only Part Of The Data Is Shown Here, Not All)
DN
| The end diameter | Length |
D1 | D2 |
A | B | A | B | L |
20*15 | 26.9 | 25 | 21.3 | 18 | 38 |
25*20 | 33.7 | 32 | 26.9 | 25 | 51 |
25*15 | 33.7 | 32 | 21.3 | 18 | 51 |
32*25 | 42.4 | 38 | 33.7 | 32 | 51 |
32*20 | 42.4 | 38 | 26.9 | 25 | 51 |
32*15 | 42.4 | 38 | 21.3 | 18 | 51 |
40*32 | 48.3 | 45 | 42.4 | 38 | 64 |
40*25 | 48.3 | 45 | 33.7 | 32 | 64 |
40*20 | 48.3 | 45 | 26.9 | 25 | 64 |
40*15 | 48.3 | 45 | 21.3 | 18 | 64 |
50*40 | 60.3 | 57 | 48.3 | 45 | 76 |
50*32 | 60.3 | 57 | 42.4 | 38 | 76 |
50*25 | 60.3 | 57 | 33.7 | 32 | 76 |
50*20 | 60.3 | 57 | 26.9 | 25 | 76 |
65*50 | 76.1(73.0) | 76 | 60.3 | 57 | 89 |
…….. | …….. | …….. | …….. | …….. | …….. |
…….. | …….. | …….. | …….. | …….. | …….. |
900*850 | 914 | - | 864 | - | 610 |
900*800 | 914 | 920 | 813 | 820 | 610 |
900*750 | 914 | - | 762 | - | 610 |
900*700 | 914 | 920 | 711 | 720 | 610 |
Tensile Requirements of ASME B16.9 Ti-0.2Pd
| Grade | Tensile strength(min) | Yeild strength(min) | Elongation(%) |
| ksi | MPa | ksi | MPa |
| 7 | 90 | 620 | 70 | 438 | 15 |
| Grade | N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
| Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | balance |
FAQ
1. Are you the manufacturing or trading company?
Real manufacturing company, started from 2001, nearly 20 years.
With 2 sales teams for foreign trading business, started from 2008,
more than 10 years experiences.
2. Do you have a dedicated R & D team? Can you design a product for
us?
We have a dedicated technical team responsible for research and
development. But most of titanium fittings are standard, we can
follow ASTM or other you asked.
3. Can you provide samples? Is there a charge?
Samples can be provided for a fee.
4. What is your payment method?
We can accept T / T, LC, trade assurance order from alibaba.com.
Samples are 100% prepaid. Orders for mass production are below 1000
USD, 100% prepaid, above 1000 USD, 30% prepaid, and 70% paid before
delivery.
5. How long is your delivery time?
Inventory samples: within 3 working days Products for bulk orders:
25-30 days under normal circumstances.
6. After-sales products, how to deal with problems?
Based on our statistics for each year, the probability of problems
with titanium products is around 0.8%. There are two main reasons
for the problem:
1) Among the products that have problems, 93% are misplaced in
pre-sales communication, and the product that the customer needs is
not really clear.
2) 5% is an unexpected situation and the extension of the
construction period.
3) 2% is the problem of transportation and packaging. During
long-distance transportation, the packaging is damaged and the
surface is damaged.
7. What is your company's response to the product in question?
1) Verify and blame for pre-sales communication issues.
Compensation is handled according to the proportion of liability.
2) We are 100% responsible for problems caused by damaged packaging
during transportation.
Tag:Titanium Reducer, Eccentric Titanium Reducer.R(E)
